Polyurethane Pigment 100g. Full compatibility with all Polyurethane systems! Recommended for our fast casts, elastomers and foams. Added at 1-10% by weight to resin to pre-colour the plastic. A very small amount of this pigment, in particluar black makes for a good priming base colour.
In small amounts this may also be used in our epoxy resin systems. In the 2:1 Water Clear Epoxy, a small amount of red gives a light coloured transparent "strawberry sauce".
Available in 7 colours: Red, Blue, Yellow, Black, White, Green, Orange. These are intermixable, unlike polyester pigments. By adding Blue+Red you will get a Purple. Add White to that and get a Lilac/Lavender like colour for example.
100g Polyurethane Pigment now supplied in 130ml widemouth "Snap-Cap" pots allowing you to get to ALL your pigment with minimal container wet out loss! We left the original picture as you can see the colours through the pots.