ACC Silicones Thixotropic 100g lot for addition to the ACC Silicones 900 range of condensation cure RTV Silicone Rubber.

Addition at 2% will give a thick, buttery like silicone that can be applied via applicator or pallet knife. This will cling to verticals and overhangs without any slump. The net result is the ability to create thin skin like moulds in situ for copying cornince or other mouldings. For brush on RTV try 1% but if you want full thixotropy, then the datasheet recommends 2%.

For a  kilo of base, would need 10-20g as appropriate, so 100g is ideal for a 5kg pack of RTV Silicone Rubber.

This may also be used in the construction of a skin mould without the need for building a box, padded out with clay or similar. All moulds made in this fashion will require some type of support case as the rubber will not self support at 10mm skin.

Price indicated is for a 100g pot. Bottle may vary from picture to improve quality or extraction of the material

PARTIAL COMPATIBILITY WITH TOMPS VALUE SILICONE! - partial thixtroping effect only, recommended only for blanket moulds when in full attendance as the rubber may slump.

ACC Silicones Thixotropic Technical Data Sheet

ACC Silicones Thixotropic Material Safety Data Sheet