AP10 80 Polyurethane Elastomer. With a shore A hardness of around 80, this elastomer is very useful. It can be cast in sections to produce midly flexible items and has been successfully used to replicate harder rubbers often found in bushes and mounts for automotive. Got a bush you can't buy? Simple. Grab some RTV silicone and this product and make your own!

LOW Linear Shinkage, excellent tear strength and wear resistance. Makes an excellent concrete tampo pad! If yu ou have no undercuts, then you can also use this as a mould making material. When casting with resins and urethanes, use our Liqui Wax 1 release agent.

Gel Time 4 - 10 minutes, Demould Time 2-3 hours, Full Cure in 2-3 days. Hardness at 72 hours 80-90 Shore A. Measurements and timings assumes a 100g mix at 25 celsius.

Should you need larger volumes, rather than a larger kit we offer dscounts on multiples. 5% discount on 5 kits purchased, 10% discount on 10+ kits purchased.