Alginates

Our mixing guide when using our Pro Alginate Bodycasting system. Mixing Ratios, working time, safety and a troubleshoot section. Includes how to extend working times without sacrifice on strength of the product.

Epoxy Mixing Guide

Never used Epoxy? Its fairly simple to use and very strong, however its mission critical you are accurate with measurements. If you dont have digital scales, now is the time to invest. Covers the basics and mixing ratios for our lamination epoxy. Some epoxies will differ, so always read the tech data sheet.

Polyesters

A step by step guide designed to be used for mixing our Polyester Resins & Gelcoats. Covers laminating & casting resins, gelcoats and some troubleshooting on their use.

Polurethanes

Our Mixing Guide for Polyurethane Fast Cast Resins and Foams. Safety advice and troubleshooting. Please ensure you read the datasheets relating to Polyurethanes prior to use. They are dangerous products and hazardous to health.

Plasters

Our handy how to guide on mixing gypsum based plasters for use in casting and reinforcement of mould support cases. Water to plaster ratios by weight and a rough guide on mixing on the fly, that is to say, without scales!

Silicones

Our mixing guides for all our RTV Silicones from our standard condensation cure and heat resistants to our new Viscolo range. Includes addition ratios, suggested methods and troubleshooting.

Additives

Our additives mixing guide. This covers PIGMENTS as well as wax agents, accelerants and filler powders. Basic instructions with suggested ratios and which additives wont mix well with others are here.