Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK

Axson Fast Cast Resin

Axson Technologies Polyurethane Resins & Epoxy Systems.

Based in the UK with manufacturing all over the world, TOMPS are proud to offer the Axson Polyurethane Resins from stock!

Our current stock lines include:

  • Axson F16
    • Fast Setting, short potlife, heat resistant, with a rapid 30 minute demould - Polyurethane Resin System
  • Axson F18
    • Lowest viscosity, low shrink and good impact resistance with this Polyurethane Resin
  • Axson F19
    • Long Potlife, close to the TOMPS Fast Cast Extended Potlife, heat resistant and very low shrinkage
  • Axson F32
    • Fast demould, low agression to RTV Silicone Moulds, ideal for extending mould life using Polyurethane Fast Casts
  • Axson F38
    • Brilliant impact resistance, low viscosity, almost thermoplastic like finished resin

We also will shortly be stocking a range of epoxies, including a water clear and adhesives. This section of tomps.com is set to grow!

£7.99 (£9.59 inc tax)
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!

F160 by Axson - Fast Potlife & Cure Times for fast prototyping

In stock

£7.99 (£9.59 inc tax)
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!

F180 by Axson - Longer potlife. More Impact resistant than F16, white when cured, extended cure time

In stock

£7.99 (£9.59 inc tax)
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!

F190 by Axson - Longer Potlife @ 6-8 mins with equal impact resistance to F18.

In stock

£9.99 (£11.99 inc tax)
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!, 1:1 by weight never by volume, there is a substantial difference in density of the two parts. Please refer to the technical data sheet!
F38 by Axson - Impact resistant, thermoplastic like when set
In stock

£9.99 (£11.99 inc tax)
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!, 1:1 by weight not by volume, there is a substantial density difference between the two Parts, please refer to the technical data sheet
F32 by Axson - Lower aggression on RTV Silicones. Best choice for mould life.
In stock