Pine Restoration Lath for use in Listed Building work. We have supplied this product on numerous occasions to builders working on Grade 2 Listed Buildings. Suitable for both replacement of ceiling and wall lath, these lath have never been rejected by English Heritage.
PRICE PER SQUARE METRE COVERAGE! Price is per quare metre of coverage, just order for the square metres that you need to replace! Nominal length is 3m, though we do occasionally have stocks on 2.7 or 3.3.
Rough sawn across their main face of 25mm, band sawed to its 25mm thickness, these laths mimic older cutting methods. There is variation on the depth, nominally 25mm, can change a few millimetres either way.
The thickness is regulated at 5.5 to 6mm giving a firm substrate on which to apply lime mortars, putties and gypsum plasters. We remove the very knotty lengths to ensure quality and strength.
The rate indicated is for one square metre of coverage. This is nominal based on 300 linear metres covering 7.6 sq. mt. Please measure your area in metres, multiply by 1.1 for contingency and then order the number of metres for coverage.
Our calculations are based upon accurate 3 feet centres AND a 6mm gap between lath. If in any confusion, please call us!
To order more than one square metre, add one to cart, which will take you to the shopping cart screen where you can add as many units as you need.