Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK

Polyester Casting Resin 0.5 to 25kg Kits

£4.99
(£5.99 inc tax)
10 days
Price in points: 275 points
Reward points: 5 points
Weight: 2.10 kg per item
Polyester Casting
In stock
+
Add to wish list

DSM 6060 Polyester Casting Resin. We supply this primarily as an unfilled casting resin with fantastic low exotherm. Add a choice of fillers to help with impact resistance, shrinkage, colour or effect such as cold casting. By using this resin instead of a pre-filled figurine resin you can craft just the resin you need! This resin is low viscosity (thats runny for the non techy people!) at 23 celsius giving fantastic air release. The data sheet does not show this use for this resin but we have some 300 customers who say this is their polyester casting resin of choice!

This resin is a medium reactivity, low exotherm, low viscosity , pre-accelerated orthophthalic resin incorporating a colour change mechanism on initiation. It can be used for lamination too. Kits available from 0.5kg to 25kg and sufficient catalyst is supplied for the job to add at 3%. Additional catalyst is available from the shop.

Datasheets and Safety:
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!
Mixing Guide:
Polyester Resins are cured with MEKP, a corrosive peroxide. It is added at 0.75% to 4% by weight. We do not recommend under 1% as any error in weighing may mean the product fails to cure. Adding more MEKP will reduce the working time (POT or POTLIFE) and mean the resin reaches peak exotherm faster. It will not make the system exotherm any more than with a lower dose, it simply gets to its cross linking temperature faster. It is a myth that adding less MEKP affects the maxium exotherm temperature! Weigh out the desired volume of resin Calculate the required catalyst (1-4% by weight) Add the catalyst and stir well ensuring you combine the whole mix Stand briefly to degass If using degassing equipment bear in mind the vapour pressure of the product. Excess drawn vacuum will boil the product Pour and allow to cure

Technical Data Sheet (6060_TECH.pdf, 26 Kb) [Download]

Material Safety Data Sheet (MSDS / CoSHH) (6060_MSDS.pdf, 150 Kb) [Download]