Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK

TOMPS Products

£9.49 (£11.39 inc tax)
Hand Made Picking Tools from the UK! Sheffield steel, hand finished. Real craftmanship, these are tools for life!
In stock

£15.99 (£19.19 inc tax)
Epoxy.or Polyurethane Parfilm Paintable Release Agent in a 12oz aerosol can. Instead of using silicone based release agents, try Price Diriscoll Parfilm....
In stock

£4.15 (£4.98 inc tax)
Consolidation roller for GRP lamination.
In stock

£2.58 (£3.10 inc tax)
Chopped Strand Mat 450g. We do have other weights please enquire.
In stock

£19.95 (£23.94 inc tax)
Chopped Strand Mat 300g. We do have other weights please enquire.
In stock

£8.99 (£10.79 inc tax)
Better protection from Polyurethane products, tougher than latex and perfect for latex allergy sufferers.
In stock

£2.39 (£2.87 inc tax)
Standard Oil Based Plasticine. We only stock white at present.
In stock

£3.99 (£4.79 inc tax)
A novice guide to starting in Moulding & Casting. Covers basic moulding in multiple materials, casting guides and more.

£28.99 (£34.79 inc tax)

Sulphur Free, Meltable, Pourable.

In stock

£30.00 (£36.00 inc tax)
MixM8 in action!
All new mixing for plasters with the MixM8 whisk. Full bags of plaster can be mixed much faster! Hex and Threaded connections!
In stock

£3.27 (£3.92 inc tax)
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!
Meths for general cleaning and solvent purposes.
In stock

£10.00 (£12.00 inc tax)
Fine Metal Powders for use in resins to produce Cold Casting Effects simulating metal
In stock

£2.49 (£2.99 inc tax)
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!, GRP Fibre Glass Polyester Casting Resin or Polyester Gelcoat 1. Weigh out the desired volume of resin or gelcoat into a suitable container 2. Calculate the catalyst required at a ratio of 1.5-3% by weight 15g to 30g per kilo 3. If preferred add catalyst by volume at 13-26ml per 1000g 4. Stir very well, trying not to entrap any air and ensuring you get right to the edges and bottom 5. To be sure of full catalysation, tip from one pot to another after first mix and re-mix 6. Allow to stand for a few moments for air release (casting resin only) 7. Tip into the mould or paint onto the surface 8. Allow to cure (see the data sheet 6060_TECH.pdf (resin) or neo2000_TECH.pdf (gel) for cure times) 9. Cure times will vary on catalyst added and ambient temperatures. In cold climate add extra catalyst to a max. of 4% --Ensure your mould is free of water or dampness before casting- this will inhibit cure in top layers --Try not to cast in freezing cold or overly damp conditions --Ensure you resin is fully mixed, if it is not you will get pockets of uncured resin --Be as accurate as possible with weighing catalyst and resin - buy digital scales 1g increment for larger volumes, 0.1g increments for less --Ensure you are adding the right amount of catalyst. Add more if your mould is dry and resin is fully mixed yet still tacky on demould --In cold conditions you will need more catalyst. If you get yellowing or cracking that is too much catalyst! --Wipe uncured surfaces with acetone and buff with a wax to save the piece, though this is not guaranteed to save it! --If your resin is colder than 23 celsius and the ambient temperature is cold then the cure time will substantially increase.
MEKP Catalyst for curing Polyester Resins & Gelcoats
In stock

£4.21 (£5.05 inc tax)
Marble Flour for simulating the cool touch of marble in resins & Marble Sugar for bulking and adding weight
In stock

£6.99 (£8.39 inc tax)
A starters guide to making latex moulds & supportive cases

£5.52 (£6.62 inc tax)
No Technical Sheet Available MSDS Available - Product is NON TOXIC - Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!
Non toxic latex rubber pigment, viscous liquid, easy to mix in.
In stock

£8.99 (£10.79 inc tax)
Lightly powdered gloves for general protection of hands.
In stock

£11.95 (£14.34 inc tax)
200 linear metres per roll, cardboard centre for mounting for easy dispensing.
In stock

£45.00 (£54.00 inc tax)
200 linear metres per roll, cardboard centre for mounting for easy dispensing.
In stock

£4.49 (£5.39 inc tax)
200 linear metres per roll, cardboard centre for mounting for easy dispensing.
In stock