Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK

TOMPS Products

£3.08 £1.50
Plasterers Splash Brush. A long handled tar brush richly filled with coco bristles. Made in the UK by professional brush manufacturers who know how to...
In stock

£1.42
General purpose brush, natural bristle, low bristle loss.
In stock

£1.13
General purpose brush, natural bristle, low bristle loss.
In stock

£0.99
General purpose brush, natural bristle, low bristle loss.
In stock

£0.93
General purpose brush, natural bristle, low bristle loss.
In stock

£0.95
General purpose brush, natural bristle, low bristle loss.
In stock

£0.68
General purpose brush, natural bristle, low bristle loss.
In stock

£4.15
Consolidation roller for GRP lamination.
In stock

£9.89
Ideal for getting plaster out of a bucket! The square nose makes life much easier!
In stock

£34.94
Heavy duty scraper - lifts plaster from shop floors easily. Robust & Industrial and spare blades available too!
In stock

£4.34
Easy mixing with clean, smooth beechwood tongue depressors.
In stock

£3.66
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!, MIXING RATIO: 100:42 VCat Setting Time: 6-25 Minutes Which translates as 100g plaster 42g water. Since 100cc or ml of water = 100g, one can assume 100g plaster to 42cc water. Other ratios are on the technical data sheet, click the appropriate tab to view. To approximate the requirement for the mould, fill the mould with water and empty into a mixing container, ideally graduated. Divide the total volume by 42 and multiply by one hundred for the correct weight of plaster. Sprinkle or seive the plaster into the water and allow to abosorb water fully before stirring Do not whisk, you will entrain air and cause bubbles! You can also estimate the amount of plaster needed by sprinkling plaster onto the measured water and continue to do so until the plaster level reaches the water level in the container. You will see a sub surface lunar landscape like picture. Our friends at hirstarts.com also have a pictorial mixing guide for this Heath Robinson method.
Herculite 2 Plaster. For giftware, masters and models where whiteness and durability on a budget are key.
In stock

£6.95
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!, Polyester Resins are cured with MEKP, a corrosive peroxide. It is added at 0.75% to 4% by weight. We do not recommend under 1% as any error in weighing may mean the product fails to cure. Adding more MEKP will reduce the working time (POT or POTLIFE) and mean the resin reaches peak exotherm faster. It will not make the system exotherm any more than with a lower dose, it simply gets to its cross linking temperature faster. It is a myth that adding less MEKP affects the maxium exotherm temperature! Weigh out the desired volume of resin Calculate the required catalyst (1-4% by weight) Add the catalyst and stir well ensuring you combine the whole mix Stand briefly to degass If using degassing equipment bear in mind the vapour pressure of the product. Excess drawn vacuum will boil the product Pour and allow to cure To prevent tacky finishes use only in silicone moulds and exclude air with use of a waxed sheet of glass or cling film Exposure to air during cure will cause a tacky finish on the exposed parts
"Water White" or Water Clear, DSM 0328 Polyester Casting Resin. Simulates ICE very well.
In stock

£9.49

Hand Made Picking Tools from the UK! Sheffield steel, hand finished. Real craftmanship, these are tools for life!

In stock

£4.49
Flambeau's Flagship Bucket, far longer lasting than the economy version, less likely to break if knocking out set plaster!
In stock

£19.99
Technical & Material Safety Data Sheet (MSDS / CoSHH) Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!
99.6% Purity Acetone for cleaning and degreasing
In stock

£4.99
If you are unsure which pigments are lead based or containing lead, please ask and we will confirm with the manufacturers! Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!
Pigment for Polyester Resin & Gelcoat. Will not disperse in any other resin! 100g or 1kg Kits
In stock

£3.27
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. It is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!
Meths for general cleaning and solvent purposes.
In stock

£2.49
Standard paper cup, waxed, ideal for resin.
In stock

£6.49
Please note that we no longer print and include datasheets with your order. All datasheets are available for download on the item where your purchase was made. it is the responsibility of the purchaser to download and read the information. Please think of the environment before deciding to print!
Ceramic Microspheres for padding out resin & lightening casts. Will impart a grey shade to many resins.
In stock